Temple's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across Texas.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in Temple.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
In a city like Temple with 103,001 residents, commercial and residential energy demand is enormous — and so is the opportunity to reduce it. Lapolla Industries installs spray foam roofing and insulation systems that deliver the highest R-value per inch of any product on the market, cutting HVAC energy consumption by 20 to 40 percent in buildings across Temple, TX.
Our SPF technology works by creating a monolithic, air-impermeable barrier that conventional insulation materials cannot match. Fiberglass settles. Cellulose shifts. Foam board has seams. Spray foam expands to fill every cavity and conforms to every surface, eliminating the thermal bypasses that drive energy waste in Temple buildings. The result is measurable savings from the first month.
Here is what sets Lapolla Industries apart from other contractors in Temple.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Have questions about spray foam in Temple? We have answers.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Temple we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Absolutely. SPF roofing performs exceptionally in both extremes because the closed-cell foam provides continuous insulation without thermal bridging. In hot Temple summers, the reflective coating reduces surface temperatures by up to 50 degrees. In winter, the insulation value keeps conditioned air inside.
Spray foam insulation costs in Temple typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Temple homeowners see a full return on investment through energy savings within 3 to 5 years.
Most residential attic insulation projects in Temple are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Spray foam is one of the best solutions for flat and low-slope roofs in Temple. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Temple. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Temple roof with drainage challenges or heavy weather exposure.
Real reviews from property owners we have served across the country.
"They waterproofed our entire flat roof with a seamless elastomeric membrane. Two years later and not a single drop of water has gotten through. The application was clean and fast — three days for 8,000 square feet."
"Had a few spots where birds had pecked through the coating on our foam roof. The repair crew patched every spot and applied a fresh topcoat over the entire section. Looks brand new and no more leaks."
"Water was coming in around our skylight every time it rained. Lapolla Industries traced it to deteriorated sealant and improper flashing. They redid everything and we have been bone dry through two heavy storm seasons now."
Lapolla Industries proudly serves property owners in these cities near Temple.